The Full Band Spectrum (FBS) circuit automatically transmits multiple frequencies simultaneously. The increased frequency range means that the signal received from the detector coil is analyzed from a wide range of responses. This allows the Explorer SE to analyze more target information so that the Target Identification (ID) is more accurate. Ground balancing is automatic with Minelab\\\'s advanced digital filtering. Whatever field conditions you encounter, from dry clay to wet black sand or rich loam, Minelab will find what you\\\'re looking for. Minelab\\\'s unique FBS technology means deep, sensitive, accurate detecting. Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

This powerful, intelligent metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea! The Excalibur II we’re featuring comes with a powerful 8” searchcoil and state of the art submersible headphones. This Minelab Excalibur II comes with a 8” Double ‘D’ coil that contains two ‘D’ shaped windings and is perfect for locating deep targets. The Double ‘D’ coil provides you with a detection pattern as you search that is “blade like” and is sensitive from tip to heel. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting. Because the Excalibur II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless! Possibly the most impressive aspect of the Excalibur II may not be its capacity to go 200ft. under water, but its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions. The Excalibur’s 17 frequencies literally provide an “Iron Mask” feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Excalibur’s transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses. Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Excalibur II, set the controls between operating modes, and start your treasure hunt. The Excalibur II will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you’ll hear is the one indicating you’ve found treasure! There are two operating modes on the Excalibur II – “Discriminate” mode and “Pinpoint” mode. While these modes seem simple in theory, we’re sure you’ll find them both to be quite powerful. Simply set the controls to your desired position depending on your location and what your desired treasure is and go! Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

This powerful, intelligent metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea! The Excalibur II we\\\'re featuring comes with a powerful 10\\\" searchcoil and state of the art submersible headphones. This Minelab Excalibur II comes with a 10\\\" Double \\\'D\\\' coil that contains two \\\'D\\\' shaped windings and is perfect for locating deep targets. The Double \\\'D\\\' coil provides you with a detection pattern as you search that is \\\"blade like\\\" and is sensitive from tip to heel. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting. Because the Excalibur II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects - this means the possibilities of finding treasure are almost limitless! Possibly the most impressive aspect of the Excalibur II may not be its capacity to go 200ft. under water, but its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions. The Excalibur\\\'s 17 frequencies literally provide an \\\"Iron Mask\\\" feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Excalibur\\\'s transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses. Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Excalibur II, set the controls between operating modes, and start your treasure hunt. The Excalibur II will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you\\\'ll hear is the one indicating you\\\'ve found treasure! There are two operating modes on the Excalibur II - \\\"Discriminate\\\" mode and \\\"Pinpoint\\\" mode. While these modes seem simple in theory, we\\\'re sure you\\\'ll find them both to be quite powerful. Simply set the controls to your desired position depending on your location and what your desired treasure is and go! For each type of treasure you find a different tone will signal. After a little bit of practice we\\\'re confident you\\\'ll know exactly what you\\\'ve found before you dig for it. Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

Minelab likes to boast that the Eureka Gold is like having three detectors in one, and we completely agree. The Eureka Gold features three frequencies for you to work on to provide you with the ultimate gold prospecting experience. The 6.4 kHz frequency is for locating targets at their maximum depth, it goes deeper to find the larger nuggets. The 20 kHz frequency is more sensitive, perfect for finding small nuggets and general detecting. Finally there is a 60 kHz frequency which detects the smallest gold flake with its super sensitivity. The Minelab Eureka Gold comes with a 10” Double ‘D’ coil that contains two ‘D’ shaped windings and is perfect for locating deep targets. The Double ‘D’ coil provides you with a detection pattern as you search that is “blade like” and is sensitive from tip to heel. This allows you to pinpoint your targets easily because you can cover more ground with each sweep, with almost zero overlapping! We were really impressed with the Eureka Gold’s ability to search for treasure underneath highly mineralized soil. Minelab’s “Accu-Trak,” digital, ground balance features two switchable recovery speeds. This keeps your treasure hunting from being restricted as you move over different areas and types of terrain. Even better – it allows you to find more gold, faster and easier than with any other detector. Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

The Minelab Sovereign GT comes with a 10” submersible, “Slimline” search coil that comes from the “Tornado” series. It features its own on-board transmit circuitry, which adds power and depth to your detector. This allows you to pinpoint your targets easily because you can cover more ground with each sweep, with almost zero overlapping! Possibly the most impressive aspect of the Sovereign GT is its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions. The Sovereign GT’s 17 frequencies literally provide an “Iron Mask” feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Sovereign GT transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses. Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Sovereign GT, set the controls between operating modes, and start your treasure hunt. Also featured on the Sovereign GT is the new “Accu-Track Digital Ground Balance” with selectable “Fixed” or “Automatic” tracking options – giving you more depth with each step. The Sovereign GT will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you’ll hear is the one indicating you’ve found treasure! Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

The Minelab Sovereign GT comes with a 10” submersible, “Slimline” search coil that comes from the “Tornado” series. It features its own on-board transmit circuitry, which adds power and depth to your detector. This allows you to pinpoint your targets easily because you can cover more ground with each sweep, with almost zero overlapping! Possibly the most impressive aspect of the Sovereign GT is its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions. The Sovereign GT’s 17 frequencies literally provide an “Iron Mask” feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Sovereign GT transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses. Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Sovereign GT, set the controls between operating modes, and start your treasure hunt. Also featured on the Sovereign GT is the new “Accu-Track Digital Ground Balance” with selectable “Fixed” or “Automatic” tracking options – giving you more depth with each step. The Sovereign GT will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you’ll hear is the one indicating you’ve found treasure! Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

Target Identification With its High Trash Density setting, Target IDs and audio tones are updated when sweeping over closely spaced targets FAST! This improves the recovery of deeply buried high conductivity targets in a trashy environment and allows you to more accurately identify the type of target found. Pinpointing Accurate and easy-to-use. Press the pinpoint button and watch the E-Trac zone in on the precise location of that precious target. Detect Modes With four pre-programmed detect modes you may choose from; Coin, Coin & Jewelry, Relic or All Metal. Each mode contains optimum settings for identifying the characteristics of preferred targets. Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)

Minelab\\\'s latest and greatest metal detector is the all new, Full Band Spectrum (FBS) fueled Safari! Featuring four pre-programmed detection modes and four programmable user modes, the Safari is easy-to-use while continuing Minelab\\\'s reputation for being cutting edge! Advanced, digital filtering will automatically eliminate and influence the ground signals for seamless detecting no matter what your field conditions may be! Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)