This powerful, intelligent metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea! The Excalibur II we’re featuring comes with a powerful 8” searchcoil and state of the art submersible headphones.
This Minelab Excalibur II comes with a 8” Double ‘D’ coil that contains two ‘D’ shaped windings and is perfect for locating deep targets. The Double ‘D’ coil provides you with a detection pattern as you search that is “blade like” and is sensitive from tip to heel. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting.
Because the Excalibur II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless!
Possibly the most impressive aspect of the Excalibur II may not be its capacity to go 200ft. under water, but its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions.
The Excalibur’s 17 frequencies literally provide an “Iron Mask” feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Excalibur’s transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses.
Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Excalibur II, set the controls between operating modes, and start your treasure hunt. The Excalibur II will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you’ll hear is the one indicating you’ve found treasure!
There are two operating modes on the Excalibur II – “Discriminate” mode and “Pinpoint” mode. While these modes seem simple in theory, we’re sure you’ll find them both to be quite powerful. Simply set the controls to your desired position depending on your location and what your desired treasure is and go!
Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)
This powerful, intelligent metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea! The Excalibur II we\\\'re featuring comes with a powerful 10\\\" searchcoil and state of the art submersible headphones.
This Minelab Excalibur II comes with a 10\\\" Double \\\'D\\\' coil that contains two \\\'D\\\' shaped windings and is perfect for locating deep targets. The Double \\\'D\\\' coil provides you with a detection pattern as you search that is \\\"blade like\\\" and is sensitive from tip to heel. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting.
Because the Excalibur II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects - this means the possibilities of finding treasure are almost limitless!
Possibly the most impressive aspect of the Excalibur II may not be its capacity to go 200ft. under water, but its 17 frequencies. This is possible thanks to the BBS (Broad Band Spectrum) technology. Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions.
The Excalibur\\\'s 17 frequencies literally provide an \\\"Iron Mask\\\" feature that allows you to reject iron, yet still detect good, valuable treasure scattered among it. The range of the Excalibur\\\'s transmission is from 1.5 kHz to 25.5 kHz (done in 1.5 kHz increments). All 17 frequencies are transmitted together at one time, operating simultaneously with multiple tone responses.
Thankfully these multiple, simultaneous frequencies are easy-to-use and understand. Just like a single frequency detector, you turn on the Excalibur II, set the controls between operating modes, and start your treasure hunt. The Excalibur II will do the majority of the work by interpreting target signals, removing ground mineralization interference and analyzing the remaining signal. The only sound you\\\'ll hear is the one indicating you\\\'ve found treasure!
There are two operating modes on the Excalibur II - \\\"Discriminate\\\" mode and \\\"Pinpoint\\\" mode. While these modes seem simple in theory, we\\\'re sure you\\\'ll find them both to be quite powerful. Simply set the controls to your desired position depending on your location and what your desired treasure is and go! For each type of treasure you find a different tone will signal. After a little bit of practice we\\\'re confident you\\\'ll know exactly what you\\\'ve found before you dig for it.
Shipping to: (US, Mexico, Canada, North and South America, and the entire Caribbean only)
This powerful, Pulse Induction metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea! The Infinium LS we’re featuring comes with a powerful 10” x 14” PROformance Power DD searchcoil and underwater headphones.
A PROformance DD 10” x 14” submersible searchcoil at the end of the Infinium LS is state-of-the-art “Rhino Tough” and interchangeable with three other sizes. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting. Because the Infinium LS was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless!
Possibly the most impressive aspect of the Infinium LS may not be its capacity to go 200ft. under water, but its 96 frequencies. No other manufacturer even comes close to creating a detector with this many frequencies! This is possible thanks to the API (Advanced Pulse Induction) technology that simultaneously provides the greatest number of multiple frequencies of any detector on the market – meaning you’ll find more with this detector than with any other! Find thin gold nuggets and delicate jewelry other detectors miss, while ignoring hot rocks, salt, terra cotta and overall changing ground conditions.
In addition to the plethora of frequencies provided by the Infinium LS, you’ll also be impressed with the detection depth and stability in mineralized environments. This means that no matter where you are – Arizona gold fiends, the volcanic rockslides of the Pacific Northwest or the black-sand beaches on the coast of Italy – the Infinium LS will provide the best results for the active treasure hunter because it can literally go anywhere. If you’re hunting in similar soil, the Infinium’s “Automatic Ground Tracking allows you to “lock” the ground track for the best performance. If you notice changes in the soil, choose “slow” or “fast” automatic tracking.
The “Discrimination” dial will allow you to treasure hunt “all metals” or narrow it down to a specific type. And the audible target identification assists you by employing different sounds for different metals. The best part is that the discrimination specifications are available for nearly 100% of the Infinium’s detection depth, not just your surface targets!
With adjustable and automatic ground tracking, nine advanced discrimination levels, Tone ID for enhanced target information, and a fully submersible and all-environment design, the Infinium LS is by far the most technologically advanced multiple frequency detector on the market.
This unique and powerful metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea. The Sea Hunter Mark II we’re featuring comes with an 8” PROformance searchcoil and underwater headphones.
A PROformance 8” submersible searchcoil at the end of the Mark II is state-of-the-art “Rhino Tough” and interchangeable with three other sizes. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting. Because the Mark II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless!
Garrett created the Mark II with a unique, “Discrete Trash Elimination” feature to keep you from digging up trash like pull-tabs and foil without significantly degrading the sensitivity of rings and coins. This works along with the Standard PI (Pulse Induction) to completely eliminate trash from your collection and lead you only to the treasure. Thankfully the “Discrete Trash Elimination” and “Standard PI” both function in any type of underwater or land environment. This enables both you and your Mark II to be completely at home under water and ignore salt water and iron mineralization found in salt-water environments.
Best of all, the Mark II is great for either land or sea because of the four stem configurations which include: the long stem with top, hip and under cuff stem mounts and a short stem “Scuba Mate” for underwater searches.
This unique and powerful metal detector will help you find treasures that have been both lost and missed by the generations before you either on land or 200ft. under the sea. The Sea Hunter Mark II we’re featuring comes with an 8” PROformance searchcoil and underwater headphones.
A PROformance 8” submersible searchcoil at the end of the Mark II is state-of-the-art “Rhino Tough” and interchangeable with three other sizes. This searchcoil is versatile and deep-seeking, making it effective for any type of detecting. Because the Mark II was meant to be submersible, you can take this coil and the entire detector into 200 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless!
Garrett created the Mark II with a unique, “Discrete Trash Elimination” feature to keep you from digging up trash like pull-tabs and foil without significantly degrading the sensitivity of rings and coins. This works along with the Standard PI (Pulse Induction) to completely eliminate trash from your collection and lead you only to the treasure. Thankfully the “Discrete Trash Elimination” and “Standard PI” both function in any type of underwater or land environment. This enables both you and your Mark II to be completely at home under water and ignore salt water and iron mineralization found in salt-water environments.
Best of all, the Mark II is great for either land or sea because of the four stem configurations which include: the long stem with top, hip and under cuff stem mounts and a short stem “Scuba Mate” for underwater searches.
Fisher likes to boast of the “turn on and go” operation of the 1280-X, and we think they’re completely valid for doing so. This detector offers all the features an advanced treasure hunter could want but is easy-to-use right out of the box. It functions in either salt or fresh water as well as on land and uses a patented quartz-crystal circuitry to complete 75 hours of operation. The control box features adjustable knobs for sensitivity, discrimination and volume, and converts to a belt mount for a more hands-free approach.
The Fisher 1280-X is one of the lightest and best balanced of any high-performance, multi-purpose metal detector that can go up to 250ft. under water! The 1280-X we’re featuring comes with a powerful 10.5” searchcoil and underwater headphones.
The model we’re featuring comes standard with a 10.5” searchcoil. It’s versatile and deep-seeking, making it effective for any type of detecting. Because the 1280-X was meant to be submersible, you can take this coil and the entire detector into 250 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless!
Fisher likes to boast of the “turn on and go” operation of the 1280-X, and we think they’re completely valid for doing so. This detector offers all the features an advanced treasure hunter could want but is easy-to-use right out of the box. It functions in either salt or fresh water as well as on land and uses a patented quartz-crystal circuitry to complete 75 hours of operation. The control box features adjustable knobs for sensitivity, discrimination and volume, and converts to a belt mount for a more hands-free approach.
The Fisher 1280-X is one of the lightest and best balanced of any high-performance, multi-purpose metal detector that can go up to 250ft. under water! The 1280-X we’re featuring comes with a powerful 10.5” searchcoil and underwater headphones.
The model we’re featuring comes standard with a 10.5” searchcoil. It’s versatile and deep-seeking, making it effective for any type of detecting. Because the 1280-X was meant to be submersible, you can take this coil and the entire detector into 250 feet of water without any adverse affects – this means the possibilities of finding treasure are almost limitless!
The Viper Trident metal detector is fashioned after detectors that cost hundreds of dollars more. With advantages both in and out of the water, the Viper allows you to do it all! It’s all-terrain and all-purpose!
The model we’re featuring comes standard with a 10” neutral buoyancy, concentric searchcoil. This high energy searchcoil is perfect for beaches, giving you maximum depth – Be prepared to dig deep! Because this metal detector can be safely submerged to 132 ft. underwater, you can take the entire detector – searchcoil, rod, control box and headphones – into the water with no adverse effects on your machine or its operation!
As a new addition to the Cobra metal detector family, the Viper has exclusive features that are absolutely necessary for treasure hunting. Automatic tuning and ground balance allow you to literally use this metal detector anywhere. And the full-range discriminator will ignore more of the trash that litters beaches and parks – giving you more time to find the lost jewelry and coins!
Not only is it the most affordable submersible machine on the market, it is also one of the easiest to use! With two easy-to-tune controls and factory recommended starting positions, it is extremely automatic.
To use: Turn it on using the upper-left knob and continue turning it to adjust its sensitivity. Adjust the discrimination knob in the upper-right to tune out trash. Lower the searchcoil 1-2” above the ground and wait for both the sound of treasure and the Target Light to indicate something is buried below! The bright target light is well placed on the control panel to help you locate treasures not only with the audio signal, but visually as well!
Submersible headphones come hardwired to the Viper metal detector, and its circuitry is sealed in a cylindrically shaped main control unit with dual, o-ring, water-tight housing. All external controls feature two o-ring seals to keep water out – even under the most intense pressure!
The Viper operates at 12.5kHz frequency for exceptional depth and requires only one 9 volt battery. The aluminum rods are powder coated to eliminate erosion and is fully adjustable with a cam-lock. The maximum extended length is 46” – minimum length (best for diving) is 40” and it weighs 4.2lbs.
